pz30

您的位置: 首页 > Products > Low-voltage equipment > pz30

产品摘要

The distribution box consists of the box, component installation baseplate, surface cover and plastic protection cover and it is made of the high quality copper plates; the standard installation rail is used in it and it is connected with the standard components; the epoxy powder is sprayed on the surface and oxidized with high temperature. It has good corrosion resistance; it has the modulus combination, with easy installation, use and maintenance.

产品介绍

      The distribution box consists of the box, component installation baseplate, surface cover and plastic protection cover and it is made of the high quality copper plates; the standard installation rail is used in it and it is connected with the standard components; the epoxy powder is sprayed on the surface and oxidized with high temperature. It has good corrosion resistance; it has the modulus combination, with easy installation, use and maintenance.

lThe ranted short-circuit withstand strength of the main bus is 4kA.

lThe main incoming switch type: plastic external hub type breaker.
lThe rated current grades of this unit series: 100A, 63A, 32A, 25A, 16A and 10A.

Normal Use Conditions 

lThe ambient environment temperature is not higher than +40℃ and the lower limit of the ambient air temperature is -5℃. When the maximum temperature is  +40℃, the relative humidity of the air is not greater than 50%. The higher relative humidity is allowed under the higher temperature. For example, the relative humidity is 90% when the temperature is +20℃.

lThe altitude of the installation place should be not higher than 2,000m.
lInstallation type: II.
lPollution grade: 3.

Notes: Please negotiate with us in case of out of the above-mentioned environmental conditions for normal use.

产品参数